Dekton, developed by the Spanish company Cosentino in 2013, is essentially porcelain made with advanced manufacturing processes. Its high resistance to heat, pressure, scratches, fractures, and stains has made it a surface material of choice for countertops, while related materials and applications are expanding into artificial joints and bone regeneration.
A Question That Began with an Expensive Induction Cooktop
When a couple bought a high-end induction cooktop, it did not include a cooking surface that could be placed over the burner; that surface had to be purchased from a separate company. The website did not make this clear, and instead of the tempered glass, which cost about $30 per square foot, it required Dekton, a material five times more expensive.
Such stories raise the question of why an unfamiliar material is so expensive. Dekton is an advanced substance that was difficult to manufacture about 30 years ago, but its origins lie in humanity’s 3,000-year-old use of porcelain. Porcelain was a technological leap that combined an ancient base material resembling clay plates with knowledge of kilns and chemistry.
When Porcelain’s Crystals Changed
Porcelain makers in northern China experimented with kaolin and found the starting point for porcelain production. Kaolin, which looks like ordinary clay, consists of plate-like microcrystals bonded by water. When heated, the water escapes and the needle-shaped crystals interlock firmly.
Kaolin is rich in kaolinite. At approximately 1,200°C, aluminum and oxygen form silica, while liquid glass fills the spaces inside and outside the crystal network. This process creates a dense, continuous, translucent porcelain structure.
Kiln technology was also essential to porcelain production. Chinese makers used a downward-draft ventilation structure that allowed hot air to escape through the floor, and they developed refractory bricks that would not crack or melt at high temperatures.
From White Gold to Meissen
Europe encountered East Asian porcelain around the 13th century and considered a material that was both strong and smoothly glossy to be “white gold”. However, Europeans did not understand the roles of kaolin and China stone, and even maiolica, faience, and Delftware made with cassiterite and glass powder lacked porcelain’s true impermeability and high tensile strength.
Ehrenfried Walther von Tschirnhaus explored porcelain production by heating minerals with a collecting lens. Between 1693 and the winter of 1694, he discovered that the clay from Colditz did not melt. Between August and September 1708, he mixed powdered limestone with white clay rich in kaolin to make vessels resembling Chinese porcelain.
After Tschirnhaus died, Johann Friedrich Böttger took over the manufacturing method, while Augustus the Strong established the Meissen Royal Porcelain Manufactory in 1710 and placed it under his supervision. Meissen products were stronger and less porous than their Asian counterparts, and over the following decade or so, its workers learned that local stone, called China clay, was a valuable additive.
The Porcelain Weaknesses Dekton Reduced
Developing Dekton required six years and about $200 million. A slurry of ground porcelain, glass, and quartz is baked into a sheet, after which a large hydraulic press applies a compressive force of 250,000 metric tons. It is then cured at approximately 1,200°C.
The tiny gaps and defects in traditional ceramics act as stress concentrators that collect impact energy in one place. The high temperatures and pressures used in Dekton production promote atomic diffusion at the contact boundaries between kaolinite and quartz particles, binding the material together as a single solid and reducing brittleness and structural weakness.
Wet Tiles and Ceramics Inside the Human Body
Methods that activate only when wet have also been applied to anti-slip tiles. About a decade ago, Ceramica Sant’Agostino and Inalco, companies in Italy and Spain, introduced wet-activated or in-out tiles with special crystalline compounds baked onto their surfaces. When someone steps on a wet tile, pressure forces water into numerous pores, creating a suction effect between the foot and the tile and reducing slip.
Instead of permanently replacing defective bones with 3D-printed bioceramics, researchers have created porous scaffolds that allow blood vessels and bone cells to move inside them. Over time, the structure dissolves and is replaced by the patient’s own tissue. In this way, interest in Dekton material science is expanding into physical technologies that connect countertops, bathroom tiles, artificial joints, and bone regeneration.
Source Article
This article was prepared after consulting the following original source: geeknews — What Exactly Is Dekton?

Leave a Reply